More info on the product?
Please contact Jacob Søbygaard for more information about the multi eye drilling machine
BO 02-03 - MULTI EYE DRILLING
The drilling machine is designed to drill 3 or 4 x eyes in a rigid thermoplastic materiel.
The eyes are positioned 60 / 90 degrees to each other, and with a minimum distance between upper and lower eye pattern. The raw tube is inserted vertical into the machine, after operation start the drilling process will continues automatically. As an extra feature, it can be selected if only upper or lower eye pattern shout be drilled. The drilling machine must be connected to a vacuum filter pump, to evacuate the drill shavings.
Environment
The eye drilling machine is recommended to be operated in a clean room environment.
Control panel
At the touch control panel the machine settings can be adjusted, preset and selected.
Watch our video of the machine
ACCESSORIES FOR THIS PRODUCT
SPECIFICATIONS
Production capacity:
The eye drilling machine has a production rate between 300 – 600 units per hour, depending upon the material thickness and the experience of the operator.
Tube specifications:
The eyes can be drilled in most hard thermoplastics from CH 8 to CH 42.
Tube Diameter: CH/Fr 8-42.
Tube Material: Most thermoplastics.
Tube Length: Infinite.
Tube Shape: Nelaton, Tieman, Coude, round open/closed.
Installation:
The eye drilling machine is connected to 1x230V AC 50-60Hz 10A and min. 8 bar
clean and dry compressed air.
